Multi Display; Display Protection - NEC LCD4020-BK-IT User Manual

OSD Controls
OSD TRANSPARENCY
OSD RESET

MULTI DISPLAY

MONITOR ID
IR CONTROL
TILE MATRIX
POWER ON DELAY
POWER INDICATOR
MULTI DISPLAY RESET
DISPLAY POWER SAVE
All inputs except for TV
PROTECTION
STANDBY MODE
HEAT STATUS
FAN CONTROL
SCREEN SAVER
SIDE BORDER COLOR
AUTO BRIGHTNESS
DVI, VGA, RGB/HV
input only
CHANGE SECURITY
PASSWORD
SECURITY LOCK
DDC/ CI
DISPLAY
PROTECTION RESET
- continued
Set the transparency level of the OSD.
OFF
TYPE1
TYPE2
Resets the following settings within the OSD menu back to factory setting:
OSD TURN OFF, OSD POSITION, INFORMATION OSD, and OSD TRANSPARENCY.
Sets the monitor ID number from 1-26.
Selects the mode of the monitor for use with the infra-red remote control when using
the RS-232C daisy chain.
The monitor will be controlled normally by wireless remote controller.
NORMAL
PRIMARY Choose "PRIMARY" for the first monitor within an R-S232C daisy chain.
SECONDARY Choose "SECONDARY" for all subsequent monitors within an RS-232C daisy chain.
Prevents the monitor from being controlled by wireless remote controller. To return to
LOCK
normal operation, press the "DISPLAY" button on the remote controller for 5 seconds.
Allows one image to be expanded and displayed over multiple screens (up to 25)
through a distribution amplifier.
H MONITORS Number of monitors arranged horizontally.
Number of monitors arranged vertically.
V MONITORS
POSITION Select which section of the tiled image to be displayed on the monitor.
TILE COMP Turns the TILE COMP feature on.
Enables Tile Matrix.
ENABLE
Adjusts the delay time between being in "standby" mode and entering "power on" mode.
"POWER ON DELAY" can be set between 0 and 50 seconds.
Turns on or off the LED located on the front of the monitor. If "OFF" is selected, the LED will
not light when the LCD monitor is active mode.
Resets the following settings within the MULTI DISPLAY menu back to factory setting:
MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.
Sets how long the monitor waits to go into power save mode after a lost signal.
NOTE: When connecting DVI, video card might not stop sending digital even if image has dis-
appeared. In this case the monitor does not got to power management mode.
Lowers power consumption.
Note: RS-232C Function is lost when in Eco Standby mode.
Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE.
Cooling fan reduces the temperature of the display.
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
The gamma curve becomes narrow, reducing contrast and cutting down the risk of
GAMMA
image retention.
The brightness is decreased when "ON" is selected.
BRIGHTNESS
The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT,
MOTION
LEFT) at user determined intervals.
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
Adjusts the brightness level according to the input signal.
Allows the security password to be changed. Factory preset password is 0000.
Locks the security password.
ENABLE/ DISEABLE: turn on or off the two way communication and control of the monitor.
Resets the following settings within the Picture menu back to factory setting:
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR,
AUTO BRIGHTNESS.
English-30