Picture; Adjust - NEC LCD4020-BK-IT User Manual

OSD Setting

PICTURE

BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
TINT
HDMI, DVD/HD, VIDEO, TV
input only
COLOR
HDMI, DVD/HD, VIDEO, TV
input only
COLOR TEMPERATURE
COLOR CONTROL
DVI, VGA, RGB/HV, HDMI
input only
GAMMA SELECTION
NATIVE
2.2
2.4
S GAMMA
DICOM SIM.
PROGRAMMABLE
ADAPTIVE CONTRAST
HDMI, DVD/HD, VIDEO, TV
input only
OFF
MID
HIGH
MOVIE SETTINGS
NOISE REDUCTION
VIDEO, TV input only
FILM MODE
HDMI, DVD/HD, VIDEO, TV
input only
PICTURE RESET

ADJUST

AUTO SETUP
VGA and RGB/HV input only
AUTO ADJUST
VGA and RGB/HV input only
H POSITION
V POSITION
CLOCK
VGA and RGB/HV input only
Adjusts the overall image and background brightness. Press + or - to adjust.
Adjusts the image brightness in relationship to the background. Press + or - to adjust.
Note: The sRGB picture mode is standard and cannot be changed.
Adjusts the crispness of the image. Press + or - to adjust.
Adjusts the image brightness in relationship to the background. Press + or - to adjust.
Note: The sRGB picture mode is standard and cannot be changed.
Adjusts the tint of the screen. Press + or - to adjust.
Adjusts the color depth of the screen. Press + or - to adjust.
Adjusts the color temperature of the entire screen. A low color temperature will make
the screen reddish. A high color temperature will make the screen bluish.
Note: The sRGB picture mode is set to a predefined 6500 K standard
and connot be changed.
Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.
Note: The sRGB picture mode is standard and cannot be changed.
Select a display gamma for best picture quality.
Note: The sRGB picture mode is standard and cannot be changed.
Gamma correction is handled by the LCD panel.
Typical display gamma for use with a PC.
Good for video (TV, DVD, etc.).
Special gamma for certain types of movies. Raises the dark parts and lowers the light
parts of the image. (S-Curve)
DICOM GSDF curve simulated for LCD type.
A programmable gamma curve can be loaded using NEC software.
Sets the level of adjusment for dynamic contrast.
Adjusts the amount of noise reduction. Press + or - to adjust.
Selects Film mode.
Resets the following settings within the PICTURE menu back to factory setting:
BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR TEMPERATURE,
COLOR CONTROL , GAMMA SELECTION, ADAPTIVE CONTRAST, MOVIE SETTINGS.
Automatically adjusts screen size, H position, V position, Clock, Clock Phase, White
Level, and Black Level.
H Position, V Position and Clock Phase are adjusted automatically upon power on.
Controls the horizontal position of the image within the Display area of the LCD.
Press + to move right. Press - to move left.
Controls the vertical position of the image within the Display area of the LCD.
Press + to move up. Press - to move down.
Press + to expand the width of the image on the right of the screen.
Press - to narrow the width of the image on the left.
English-27
OSD Controls
- continued