Important Information - NEC LCD4020-BK-IT User Manual

Important Information

WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EX-
POSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE
THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE
HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
MAKE SURE POWER CORD IS UNPLUGGED
FROM WALL SOCKET. TO FULLY DISENGAGE
THE POWER TO THE UNIT, PLEASE DISCON-
NECT THE POWER CORD FROM THE AC
OUTLET. DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
This symbol warns user that uninsulated voltage
within the unit may have sufficient magnitude to
cause electric shock. Therefore, it is dangerous to
make any kind of contact with any part inside this
unit.
This symbol alerts the user that important litera-
ture concerning the operation and maintenance of
this unit has been included. Therefore, it should be
read carefully in order to avoid any problems.
Canadian Department of
Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment Regula-
tions.
C-UL: Bears the C-UL Mark and is in compliance with Cana-
dian Safety Regulations according to CAN/CSA C22.2
No. 60950-1.
FCC Information
1.Use the attached specified cables with the L406T6, or
L466T7 color monitor so as not to interfere with radio and
television reception.
(1)Please use the supplied power cord or equivalent to
ensure FCC compliance.
(2)Please use the supplied shielded video signal cable,
Mini D-SUB 15-pin to Mini D-SUB 15-pin.
2.This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protec-
tion against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy, and, if not
installed and used in accordance with the instruc-
tions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harm-
ful interference to radio or television reception,
which can be determined by turning the equip-
ment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult your dealer or an experienced radio/TV
technician for help.
If necessary, the user should contact the dealer or an
experienced radio/television technician for addi-
tional suggestions. The user may find the following
booklet, prepared by the Federal Communications
Commission, helpful: "How to Identify and Resolve
Radio-TV Interference Problems." This booklet is
available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.
Declaration of the Manufacturer
We hereby certify that the color monitor
L406T6 or L466T7 is in compliance with
Council Directive 2006/95/EEC:
– EN 60950-1
Council Directive 2004/108/EEC:
— EN 55022
— EN 61000-3-2
— EN 61000-3-3
— EN 55024
and marked with
English-2
NEC Display Solutions Ltd.
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan