NEC LCD4020-BK-IT User Manual page 35

YEAR
MONTH
DAY
TIME
DAYLIGHT SAVING
SCHEDULE RESET
PIP
KEEP PIP MODE
PIP MODE
OFF
PIP
POP
SIDE BY SIDE (ASPECT)
SIDE BY SIDE (FULL)
PIP SIZE
SMALL
MIDDLE
LARGE
PIP POSITION
PIP RESET
OSD LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
OSD TURN OFF
OSD POSITION
UP
DOWN
LEFT
RIGHT
INFORMATION OSD
MONITOR INFORMATION
Resets the following settings within the SCHEDULE menu back to factory setting:
OFF TIMER, SCHEDULE SETTINGS.
Allows the monitor to remain in "PIP" mode after powering off. When Power is returned,
PIP appears without having to enter the OSD.
Picture-in-Picture
Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
Determines where the PIP appears on the screen.
Resets the following settings within the PIP menu back to factory setting:
KEEP PIP MODE, PIP MODE, PIP SIZE, PIP POSITION.
Select the language used by the OSD.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Determines the location where the OSD appears on the screen.
Selects whether the information OSD is displayed or not. The information OSD will be
displayed when the input signal or source changes. The information OSD will also give
a warning when there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
Monitor Information.
English-29
OSD Controls
- continued