Table of Contents
Advertisement
8 • Installing the Fan
Steps 8-1 – 8-3
Housing
Assembly
Screw
12
Step 8-4
Hunter Fan Company
8-1. To attach the upper switch housing, partially install two #6-32 x
3/8" housing assembly screws into the switch housing mounting
plate.
8-2. Align the keyhole slots in the housing with the housing assembly
screws.
8-3. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining #6-32 x 3/8" screw into the housing. Tighten
all three screws firmly.
to the switch housing mounting plate. Failure to properly attach and
tighten all three assembly screws could result in the switch housing
fixture falling.
Upper
8-4. Place the lower switch housing assembly over the upper switch
Switch
Housing
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 3/8" housing assembly screws.
CAUTION: Make sure the upper switch housing is securely attached
Lower Switch
Housing
Housing
Assembly Screw
41869-01 • 03/12/04
Advertisement
Table of Contents
