Table of Contents
Advertisement
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
7-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
7-2. Attach each blade to the blade iron and medallion using the three
blade assembly screws. Insert the assembly screws into the blade
iron, through the blade and into the medallion, with the blade
sandwiched between the blade iron and medallion. If you used
grommets, the blades may appear slightly loose after screws are
tightened. is is normal.
7-3. Remove the blade mounting screws and rubber shipping bumpers
from the motor.
7-4. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Blade
Mounting
Screw
Step 7-4
41869-01 • 03/12/04
7 • Assembling the Blades
Step 7-1
Grommet
Use with grommet
Use without grommet
Step 7-2
Blade Assembly
Screws
11
Hunter Fan Company
Advertisement
Table of Contents
