Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42650-01
20090817
©2009 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 42650-01
Summary of Contents for Hunter 42650-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42650-01 20090817 ©2009 Hunter Fan Co. Type 2 Models Type 2 Models Type 2 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
8 • Operating and Cleaning Your Ceiling Fan ......14 9 • Troubleshooting ....16 ©... - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42650-01 • 08/17/09 • Hunter Fan Company For Angled Ceilings: Be sure to orient the ceiling plate so that the two tabs are pointing towards the ceiling peak. -
Page 6: Assembling And Hanging The Fan
Note: To hang the fan, you must tilt the canopy to an almost vertical position so that the canopy slots sit on the ceiling plate hooks. 3-7. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate. -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42650-01 • 08/17/09 • Hunter Fan Company 4 • Wiring the Fan fsdfsdf... -
Page 8: Installing The Canopy And Canopy
Note: Your fan may have multiple tabs and grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate. WARNING: The slots in the canopy must remain engaged while swinging the canopy for alignment. -
Page 9: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 10: Completing Your Installation With Or
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 11 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 42650-01 • 08/17/09 • Hunter Fan Company Steps 7-6 – 7-7 Lower Switch Housing...
-
Page 12: Fan
Align the holes in the cover plate with the grommet hole of the metal disk. 7-13. Screw the finial onto the threaded rod end until tight. Breakaway Connector 42650-01 • 08/17/09 • Hunter Fan Company Step 7-10 Pull Chain Grommet Hole (Metal Disk) Pull Chain... - Page 13 7-21. Once you have uninstalled the light fixture, continue with step 7-6. 7-22. Re-attach the lower switch housing back to the fan and reinstall the lower switch housing screws. 42650-01 • 08/17/09 • Hunter Fan Company Lower Switch Steps 7-14 – 7-19 Plug Button...
- Page 14 8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings.
- Page 15 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills.
-
Page 16: Troubleshooting
Problem: If the light on this fan shuts off suddenly. 1. Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan. 42650-01 • 08/17/09 • Hunter Fan Company 9 • Troubleshooting 9 • Troubleshooting...
Need help?
Do you have a question about the 42650-01 and is the answer not in the manual?
Questions and answers