Compatibility - Brother FAX-2440C User Manual

Users manual - english
Hide thumbs Also See for FAX-2440C:
Table of Contents

Advertisement

DIFFICULTY
PhotoCapture Center
Removable Disk does not
work properly.
Cannot access Removable
Disk from Desktop icon.
Network Difficulties (MFC-620CN only)
I cannot print over the Network

Compatibility

If you are having difficulty sending or receiving a fax due to possible
interference on the phone line, we recommend that you adjust the
Equalization for compatibility with your phone line. The machine
adjusts the modem speed for fax operations.
1
Menu/Set
Press
2
Press
or
Basic ).
Menu/Set
Press
3
Stop/Exit
Press
Basic reduces the modem speed to 9600 bps. Unless
interference is a recurring problem on your phone line, you
may prefer to use it only when needed.
Normal sets the modem speed at 14400 bps. (Default)
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 13
SUGGESTIONS
Difficulties (MFC-620CN only)
a) Have you installed the Windows
If not, do the following:
1. Disconnect the USB cable.
2. Install the Windows
Guide. After the installation the PC will be automatically restarted.
3. Wait about 1 minute after you reboot the PC, and then connect the
USB cable.
b) Take out the media card and put it back in again.
c) If you have tried "Eject" from within Windows
media card before you continue.
d) If an error message appears when you try to eject the media card, it
means the card is being accessed.
Wait a while and then try again.
e) If all of the above do not work, please turn off your PC and machine,
and then turn them on again.
(You will have to unplug the power cord of the machine to turn it off.)
Make sure you have inserted the media card into the media slot.
Make sure that your machine is powered on and is On Line and in
Ready mode. Print Network Configuration list. (See Printing reports on
page 8-1.) Then the current settings of the network are printed.
Reconnect the LAN cable to the hub to verify that the cabling and
network connections are good. If possible, try connecting the machine
to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
2
0
1
,
,
,
.
to select Normal (or
.
.
®
2000 update?
®
2000 update. Please see the Quick Setup
®
, you must take out the
Miscellaneous
1.Compatibility

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-620cn

Table of Contents