Setting Dial Tone Detection; Compatibility - Brother MFC-425CN User Manual

Setting Dial Tone detection

When you send a fax automatically, by default your machine will wait
for a fixed amount of time before it starts to dial the number. By
changing the Dial Tone setting to Detection you can make your
machine dial as soon as it detects a dial tone. This setting can save
a small amount of time when sending a fax to many different
numbers. If you change the setting and start having problems with
dialling you should change back to the default No Detection
setting.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press

Compatibility

If you are having difficulty sending or receiving a fax due to possible
interference on the phone line, we recommend that you adjust the
Equalization for compatibility. The machine adjusts the modem
speed for fax operations.
1
Menu/Set
Press
2
Press or
▲
Normal).
Menu/Set
Press
3
Stop/Exit
Press
■
Basic reduces the modem speed to 9600 bps. Unless
interference is a recurring problem on your phone line, you
may prefer to use it only when needed.
■
Normal sets the modem speed at 14400 bps. (Default)
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 14
0 5
, , .
to select Detection (or No Detection).
▼
.
.
2 0 2
, , , .
to select Basic (or
▼
.
.
Miscellaneous
2.Compatibility