Disassembly - Pioneer DV-353-K Service Manual

7.1.6 DISASSEMBLY

DIAGNOSIS OF FJMB ASSY
1
Bonnet and Tray Panel
1
Remove the Bonnet (Screws × 6)
2
Power ON
3
Tray open (0)
4
Remove the Tray Panel
5
Tray close (0)
6
Pull out the Power Cable from the outlet.
2
4
3 5
5
3
Tray Tray Tray
Tray Panel
2
Front Panel Assy
1
Unclamp the wire.
2
Disconnect the wiring.
3
Unhook (×6)
4
Remove the Front Panel.
×3
3
2
1
DOUT ASSY DOUT ASSY DOUT ASSY
: This is not installed to this. : This is not installed to this. : This is not installed to this.
×3
3
4 Front Panel
How to Open the Tray by Manual Operating
In the reverse state, pass a small screwdriver through a slit and
slide a protruding portion of the Drive Gear of the Loading
Mechanism Assy to the direction of arrow.
If the Tray moved toward the front about 2 or 3 cm, pull out the
Tray by hands.
Small Square-bar
Screwdriver
Protruding
portion
Drive Gear
DV-353-K
Slit
Small Square-bar
Screwdriver
Loading Mechanism Assy
71