Disassembly - Pioneer DV-350-K Manual

1

7.1.6 DISASSEMBLY

A
DIAGNOSIS OF FJMB ASSY
1
Bonnet and Tray Panel
1 Remove the Bonnet (Screws × 6)
2
Power ON
3
Tray open (0)
4
Remove the Tray Panel
5
Tray close (0)
6
Pull out the Power Cable from the outlet.
B
2
4
C
5
3
Tray Tray Tray
Tray Panel
2
Front Panel Assy
1
Unclamp the wire.
D 2
Disconnect the wiring.
3
Unhook (×6)
4
Remove the Front Panel.
×3
3
E
2
1
F
74
1
2
DOUT ASSY DOUT ASSY DOUT ASSY
: This is not installed to this. : This is not installed to this. : This is not installed to this.
There is SCRB ASSY instead here. There is SCRB ASSY instead here. There is SCRB ASSY instead here.
3 5
×3
3
4 Front Panel
2
3
How to Open the Tray by Manual Operating
In the reverse state, pass a small screwdriver through a slit and
slide a protruding portion of the Drive Gear of the Loading
Mechanism Assy to the direction of arrow.
If the Tray moved toward the front about 2 or 3 cm, pull out the
Tray by hands.
Small Square-bar
Screwdriver
Protruding
portion
Drive Gear
DV-454-K
3
4
Slit
Small Square-bar
Screwdriver
Loading Mechanism Assy
4