Error Code Table - Pioneer DV-353-K Service Manual

Service manual
Hide thumbs Also See for DV-353-K:
Table of Contents

Advertisement

ERROR CODE TABLE

Error Name
FOCUS ERROR (0 x 0∗)
Focus on error
0 x 01 Focus on could not be completed
Focus off error
0 x 02 Focus off could not be completed
Focus lost error
0 x 03 Focus servo is lost
Focus balance adjust error
0 x 04 AFB on could not be completed
Focus gain adjust error
0 x 05 Focus AGC could not be completed
Focus sweep error
0 x 06
Focus reflection error
0 x 07 Dimensions of S curve did not reach to the aim value
FOCUS TIMEOUT (0 x 1∗)
Focus on timeout
0 x 11 Did timeout at focus on
Focus off timeout
0 x 12 Did timeout at focus off
Focus lost timeout
0 x 13 Did timeout at focus backup
Focus balance adjust timeout
0 x 14 Did timeout at AFB
Focus gain adjust timeout
0 x 15 Did timeout at AGC
Focus sweep timeout
0 x 16
TRACKING ERROR (0 x 2∗)
Tracking on error
0 x 21 Tracking on could not be completed
Tracking off error
0 x 22 Tracking off could not be completed
Tracking lost error
0 x 23 Tracking servo is lost
Tracking balance adjust error
0 x 24 ATB could not be completed
Tracking gain adjust error
0 x 25 AGC could not be completed
Tracking jump error
0 x 26 Tracking jump could not be completed
TRACKING TIMEOUT (0 x 3∗)
Tracking on timeout
0 x 31 Did timeout at tracking on
Tracking off timeout
0 x 32 Did timeout at tracking off
Tracking lost timeout
0 x 33 Did timeout at tracking backup
Tracking balance adjust timeout
0 x 34 Did timeout at ATB
Tracking gain adjust timeout
0 x 35 Did timeout at AGC
Tracking jump timeout
0 x 36 Did timeout at tracking jump
STEPPING ERROR (0 x 4∗)
Stepping on error
0 x 41 Stepping on could not be completed
Stepping off error
0 x 42 Stepping off could not be completed
Stepping lost error
0 x 43 Stepping servo is lost
Stepping move error
0 x 44 Stepping could not move
STEPPING TIMEOUT (0 x 5∗)
Stepping on timeout
0 x 51 Did timeout at stepping on
Stepping off timeout
0 x 52 Did timeout at stepping off
Stepping lost timeout
0 x 53 Did timeout at stepping backup
Stepping move timeout
0 x 54 Did timeout at stepping movement
No.
Causes
Check Item
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
Does the lens move up and down?
Unknown
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
Does LD become weak?
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
Does the lens move up and down?
Are not there a dirt or a scratch in
the Disc?
Are not there a dirt or a scratch in
the Disc?
Do move to inner and outer periphery
of the stepping in the test mode?
Do indicate "S-04" at the most inner
periphery of the stepping?
Do move to inner and outer periphery
of the stepping in the test mode?
Do indicate "S-04" at the most inner
periphery of the stepping?
DV-353-K
Possibility of Trouble
Remarks
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Pickup
1. Pickup
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Pickup
1. Pickup
1. Pickup
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Pickup
1. Pickup
1. Pickup
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Stepping motor
2. Inside switch
3. Driver
1. Pickup
2. Driver
3. L6315 (Front End IC)
1. Stepping motor
2. Inside switch
3. Driver
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-251Dv-353-sDv-250

Table of Contents