Disassembly - Pioneer DV-2750-S Service Manual

5

7.1.10 DISASSEMBLY

Note: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Diagnosis of the DVDM Assy
1
Bonnet and Tray panel
1
Remove the bonnet by removing the five screws.
2
Press the STANDBY/ON button to turn on the
power.
3
Press the 0 button to open the tray.
4
Remove the tray panel.
5
Press the 0 button to close the tray.
6
Press the STANDBY/ON button to turn off the
power.
How to open the Tray when the power cannot be on
Insert a screwdriver (small) into the slit located at the bottom of the
unit, and slide the projection of the drive cam in the 04 LOADER
Assy in the direction of the arrow, as indicated in the photo. If the tray
pops out a little, fully pull it out by a hand.
Projection
Drive cam
04 LOADER Assy
5
6
2 6
3
Screwdriver (small)
6
7
4
Tray
5
Tray panel
Tray open
DV-2750-S
7
8
3 5
Slit
Screwdriver (small)
8
A
B
C
D
E
F
65