Replacing The Ink Cartridges - Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual

Replacing the ink cartridges

This section describes how to replace the ink cartridges, using light magenta as an example. The replacement
positions differ for the other colors, but the procedure is the same.
See "Ink cartridge" on page 171 in this guide for the ink cartridge model numbers.
• Use of Epson brand ink cartridges is recommended. Use of non-Epson brand ink
cartridges can result in problems that will not be covered by the warranty.
• Epson cannot guarantee the quality and reliability of non-Epson brand products.
Repairs for any damage or breakdown of this product due to the use of non-Epson
brand products will not be free of charge even if the warranty period is still valid.
• This product performs color adjustment based on use of Epson brand ink cartridges. Use
of non-Epson brand ink products can adversely affect the printing quality and prevent
the product from realizing its maximum performance.
• The ink level for non-Epson brand inks is not displayed in the printer driver or other
indicators.
• Do not place the ink cartridge with the ink supply holes facing downward. This could
cause stains on a desk or other surface. In addition, dirt stuck on this product may
prevent it from functioning properly.
• Do not store ink cartridges in environments exposed to high temperatures, freezing or
direct sunlight.
1
Open the ink cartridge cover, and wait at least 4 seconds until internal operations stop.
If you take out the ink in less than 4 seconds, there is a risk that the ink may spurt out.
2 Gently push in the ink cartridge until you hear a click, unlock the lock, and then slowly
pull it straight out.
Click
132
Wait at least 4
seconds.
Push in.
Pull straight out.