Running it using the control panel on the product
1
Turn on the power of this product.
2
Press the [MENU] button.
The top menu appears.
Use the ▲/▼ buttons to display the maintenance screen, and then press the
3
Use the ▲/▼ buttons to display [Nozzle Check], and then press the
4
5
When the nozzle check confirmation screen appears, press the
The disc on which the nozzle check pattern was printed is output to Stacker 4 in Standard Mode and External
Output Mode, and it is output to Stacker 3 in Batch Mode.
See "Checking the nozzle check results" on page 137 in this guide for how to check the nozzle check results.
136
Top menu
Maintenance
Maintenance
Nozzle Check
Start nozzle
check?
button.
button.
button.