Chapter 2: Setup Guide
Menu Overview
Copy. This menu will guide you to make CD/DVD copies. Before you
■
enter this menu to copy, please make sure you have selected the cor-
rect master Reading Source. For more information, refer to "Making
Disc-to-Disc Copies" on page 16 or "Making Hard Drive-to-Disc Cop-
ies" on page 22.
Test. This menu will guide you to make simulation of copying pro-
■
cess. During this simulation process, all write once recordable discs
such as (DVD-R, CD-R) will be reusable. The purpose of performing
such simulation is to ensure error free duplication.
Note: Due to the physical limitation of DVD+R/RW recordable
format, you can not perform this procedure if your recordable
discs are DVD+R/RW recordable format. If you do so, you will
encounter failure messages.
Note: If you are using CD-RW/DVD-RW discs as your blanks
media during the simulation, all of the content inside those
discs will be erased permanently.
Compare. This menu will guide you to perform a bit-by-bit compari-
■
son between the master Reading Source and all the copied discs in-
side the writer tray. The purpose to perform this compare operation
is to ensure all of your copies have the exactly same information as
your master Reading Source.
Test + Copy. This menu will guide you to perform the simulation of
■
copying process and if everything has passed during the simulation,
a real copying process will be performed. If there's an error encoun-
tered during the simulation, an error message will be displayed and
the copying process will not be initiated.
Copy + Compare. This menu will guide you to make copies for you
■
and after the copy process has been finished, it will perform an addi-
tional comparison process automatically to ensure data correctness.
Verify. This menu will guide you to perform Disc Readalibility Check.
■
This operation will check the readiblity of your master discs and the
copied discs. The purpose to perform this verify operation is to en-
sure all of your copies are readable.
Select Burn Speed. This menu will guide you to adjust the duplica-
■
tion speed on various duplication modes. For more information, refer
to "How to Select the Duplication Speed" on page 35.
Xerox Duplicator
56