Table of Contents
Advertisement
Allow 5 to 10 seconds for the duplicator to detect your master and blank
discs. After your master disc and blank discs have been recognized, you will
see the following screen
Note: By default, the Auto Start setting is set to Auto. There-
fore, if your duplicator is not completely filled with blank discs
and there is no activity within 30 seconds, or if all the drives are
filled and the duplicator detects this, the duplicator will start
automatically.
Note: Once the number of blank discs you inserted matches
the number of discs detected on the screen, press >> (if you are
not using auto start or wish to speed up the process) to confirm
and the following processing screen will appear.
If the number of blank discs you inserted does not match the number of
discs detected on the screen, allow 10 to 15 seconds for the duplicator to
recognize all of your blank discs.
Step 4:
After two to three seconds of processing time, one of the follow-
ing Copy Progress screens will appear. The left-hand screen is shown when
"No Counter" is selected, and the right-hand screen is shown when
"Counter" is selected.
19
Preparing
7 Disc Detected,
7 indicates there are seven discs
■
recognized by the Writer tray.
The actual quantity may be dif-
ferent depending upon your
machine.
Processing
Please Wait
Go?
Xerox Duplicator
Advertisement
Table of Contents
