Xerox D1015 User Manual page 60

plicator is acting abnormal. You need to perform "Shutdown" and
restart the system in order for this to take effect.
Update Firmware. This function will update the software of your
■
duplicator. To update, you need to insert the manufacturer Certi-
fied Update CD into the Reader and select this function by press-
ing the >> button. We strongly suggest you to not update your
duplicator's firmware unless your duplicator is getting unstable.
Save. This function will save all the settings you've modified since
■
last time the system is booted.
Account Management. This feature allows you, the administrator,
■
to have the power to:
Create user accounts and passwords to prevent unauthorized use
■
of this duplicator
View existing user account lists
■
Edit existing user account information, including name and pass-
■
word
Delete existing user account(s)
■
Enable/Disable this feature
■
For more information, refer to "Introduction to the Account Man-
agement Feature" on page 50.
Autocopy. This function will allow the system to operate under the
■
AutoCopy mode for ease of operation. For more information, refer to
"Using Autocopy" on page 53.
Shutdown. This function saves any system settings that you have
■
entered and makes sure it is safe to turn off your duplicator. Once
you see the "Ready to Power OFF" message, then you can safely turn
off the machine via Power Switch. Turning off your duplicator with-
out perform this function will increase the risk of damaging your du-
plicator.
Xerox Duplicator 60