Xerox D1015 User Manual page 33

Copying
0 12%
4012MB indicates the capacity
■
of the master disc.
481MB indicates the current
■
MB from the master disc that
has been copied.
12% indicates the current
■
progress of the duplication.
0 indicates that you have made
■
zero copies thus far.
H indicates you are copying
■
from a hard drive image.
Note: It is normal to see the progress indicator staying at 0-
10% and 100% for approximately 30 seconds for CD duplica-
tion and up to 1 minute for DVD duplication. That is caused by
the initializing and finalizing stages.
Once the duplication run is completed, the good copies will be ejected and
you should see the following screen.
Remove the good copies and refill the trays with additional blank media to
continue making more copies. You can also press << to terminate your
project and go back to the Main menu.
If you've specified a counter value for your project and your project is com-
pleted, you should see the following screen.
33
H4012MB
or
481MB
Pass 7
Waiting for Blank
Pass 7 indicates you have just
■
made seven successful copies.
Fail 0 indicates you have no fail-
■
ures in this run.
7 indicates you have successful-
■
ly copied seven copies thus far.
Copying
0/21
4012MB indicates the capacity
■
of the master disc.
481MB indicates the current
■
MB from the master disc that
has been copied.
12% indicates the current
■
progress of the duplication.
0/21 indicates you have a
■
project size of 21 copies and
you have made zero copies thus
far.
H indicates you are copying
■
from a hard drive image.
Fail 0(7)
H4012MB
12% 481MB
Xerox Duplicator