Installing The Software - Panasonic Panaboard UB-5310 Operating Instructions Manual

Computer Interfacing
8
When the following window appears after files
are copied, power the electronic board on, and
connect a USB cable from the electronic
board to your computer.
• Use a shielded USB cable that is certified as
logo by USB-IF.
9
Follow the on-screen instructions if the wizard
windows appear.
• If the wizard window is displayed to select
the file (##.inf) for the printer driver in
Windows XP, select "windows\inf\oem##.inf".
• If the wizard window is displayed to connect
to the Windows Update in Windows XP SP2,
select [No].
• If the warning dialog is displayed in
Windows 2000 / Windows XP, select [Yes] or
[Continue Anyway] to continue the
installation.
• The new hardware wizard windows may be
displayed several times depending on the
operating system.
• For Windows 98 or Windows Me, a floppy
disk or CD-ROM for installing the operating
system may be required
10
When the installation is completed, click [OK].
18
.

■ Installing the software

When Panasonic-DMS is already installed, leave it
(do not uninstall it) and install the new software
in the same folder to overwrite it.
1
Power on your computer and start Windows.
• Log on as an administrator for
Windows 2000 or Windows XP.
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window will appear automatically.
• Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, double click "Menu.exe" in
the CD-ROM from the Explorer.
3
When "Welcome" window appears, click
[Next].
4
Click [Panasonic-DMS].
• To install the USB, printer and TWAIN driver,
click [Panaboard Setup] (see page 17).
• To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat Reader must be installed in your
computer.
It can be downloaded from the Adobe's Web
site if Internet is available.