Brother CP-1800 User Manual page 8

2. Setup
5
Remove each screw.
6
Attach the wall-mounting bar to the wall by re-installing the screws
into the anchors, while making sure to use the enclosed washers.
a
Mounting the copyboard
1
While holding both sides of the copyboard, hook the brackets at the
back of the copyboard onto the wall-mounting bar pegs.
a
6
Make sure that the bar is firmly attached to the wall, otherwise the
copyboard may fall down.
Do not release the copyboard until you are sure that it is securely mounted
on the wall-mounting bar, otherwise the copyboard may fall down.