Brother CP-1800 User Manual page 11

4
While holding both sides of the copyboard, hook the brackets at the back
of the copyboard onto the wall-mounting bar pegs.
a
Do not release the copyboard until you are sure that it is securely mounted
on the wall-mounting bar.
Do not push the unit upward or to either side, otherwise it may fall down.
5
Attach the tray by sliding its slots over the two brackets on the front of the
copyboard above the printer.
b
Do not subject the tray to strong impacts or use it in any way other than for
holding markers and erasers.
2. Setup
9