AT&T CL81309 - DECT 6.0 User Manual page 53

Appendix D
Troubleshooting
System does not
receive caller ID
when on a call.
Common cure
for electronic
equipment.
• Make sure you subscribe to caller ID with call waiting
features from your local telephone company. Caller ID
features works only if both you and the caller are in
areas offering caller ID service, and if both telephone
companies use compatible equipment.
If the telephone does not seem to be responding normally,
try putting the cordless handset in the telephone base or
charger. If it does not seem to respond, do the following
(in the order listed):
• Disconnect the power to the telephone base.
• Disconnect the cordless handset battery, and spare
battery, if applicable.
• Wait a few minutes.
• Connect power to the telephone base.
• Re-install the battery, and place the cordless handset
into the telephone base.
• Wait for the cordless handset to re-establish its
connection with the telephone base. Allow up to one
minute for this to take place.
48