Monitor Installation; Connecting Your Monitor - IBM 9494HB0 - T 860 - 18.1" LCD Monitor User Manual

Monitor Installation

Connecting your Monitor

4
1. Turn off your computer and all attached devices. Next, unplug the
power cord(s) to your computer and all attached devices.
2. Connect the signal cable.
The ac adapter and the analog signal cable are already connected to
your monitor.
1
When connecting the analog signal cable (Figure A)
Connect the free end of the attached signal cable to the 15-pin Monitor
port on the computer and tighten screws.
Optional
When connecting the digital signal cable (Figure B)
Connect one end of the monitor signal cable to the white connector
on the rear panel of the monitor. Connect the other end to the white
connector on the rear panel of the computer and tighten the screws.
2
The analog connector is the blue connector.
(Figure A)
(Figure B)
2
A
Power ON/OFF
included AC adapter
A
Power ON/OFF
included AC adapter
1