Sirius Satellite Radio Tuner - Pioneer DEH-P9400BH Owner's Manual

Section
Available accessories
03
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by num-
ber, channels in any category can be selected. Se-
lect by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Selecting a channel from a
channel category
1 Switch the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on this page.
2 Push or to select the desired chan-
nel category.
3 Turn LEVER to select the desired channel
from the selected channel category.
Displaying the Radio ID
1 Select the channel select settings to
Channel number.
Refer to Channel mode (channel select mode
setting) on this page.
18
En
2 Turn LEVER to select RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# RADIO ID and the ID codes are repeatedly dis-
played one after the other.

SIRIUS Satellite Radio tuner

You can use this unit to control a SIRIUS Satellite
Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on these
points. For all other information on using the
SIRIUS tuner, please refer to the SIRIUS opera-
tion manual.
Listening to SIRIUS Satellite Radio
1 2 3 4
5
1 SIRIUS band indicator
2 SIRIUS channel number indicator
3 SIRIUS preset number indicator
4 SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
I.R is displayed during the Instant Replay
mode.
5 SIRIUS channel name
Shows the channel name of broadcast chan-
nel.
Available accessories
Select a SIRIUS band.
1 Press BAND/ .
! Band can be selected from SR-1, SR-2 or
SR-3.
Select a channel.
1 Turn LEVER.
! By turning and holding down LEVER, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a de-
sired channel category. (Refer to Selecting
a channel from a channel category on the
next page.)
Switching the SIRIUS display
1 Press
/DISP.
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
! The play time is displayed during Instant
Replay mode. Refer to Using the Instant
Replay function on the next page.
! Play time display indicates the time in-
verted from the live broadcast. The play
time is displayed as a negative number.
Displaying the Radio ID
1 Turn LEVER to select CH 000.
! To select CH 000, set the channel select set-
ting to Channel number. About the channel
select setting, refer to Channel mode (channel
select mode setting) on this page.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to a SIRIUS tuner or select a channel.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press (list).
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
or turning LEVER.
Function and operation
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by num-
ber, channels in any category can be selected. Se-
lect by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Game alert (game alert setting)
or