Operating This Unit; Head Unit; Remote Control; Set Up Menu - Pioneer DEH-P9400BH Owner's Manual

Section

Operating this unit

02

Head unit

1 2 3 4
b a 9 8 7
c
Part Part
(phone/on
1 8 /DISP OFF
hook)
2 LEVER 9 BAND/
3 /DISP a SRC/OFF
MULTI-CONTROL
4 b
(list)
(M.C.)
5 c
Open button Disc loading slot
AUX input jack
6 d
(3.5 mm stereo h (eject)
jack)
7 /
CAUTION
Use a Pioneer USB cable when connecting the
USB audio player/USB memory device as devi-
ces connected to the unit directly will protrude
out, which is dangerous.
Do not use unauthorized products.
4
En

Remote control

Remote controller buttons marked with the
5
same numbers as on the unit operate in the
same way as the corresponding unit button re-
gardless of button name.
e
6
9
k
j
a
i
d
Part Operation
Press to increase or decrease
e
VOLUME
volume.
Press to mute. Press again to
f MUTE
(iPod)
unmute.
Press to perform manual seek
tuning, fast forward, reverse
g and track search controls.
a/b/c/d
Also used for controlling func-
tions.
While operating the phone,
h
press to end a call or reject an
incoming call.
Press to pause or resume play-
i
e
back.
Operating this unit
Part Operation
Press to start talking on the
j phone while operating a
phone.
Press to display the disc title,
track title, folder, or file list de-
LIST/
k
pending on the source.
ENTER
While in the operating menu,
press to control functions.
f
g
h

Set up menu

3
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1 After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2 Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3 Press M.C. to select.
4 Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
Language select (multi-language)
1 Turn M.C. to select the desired language.
English—Français—Español
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Demonstration (demo display setting)
1 Turn M.C. to set the demo display to off.
2 Press M.C. to confirm the selection.
Quit appears.
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6 Press M.C. to select.
Notes
! Because demonstration mode is the function
for displaying at stores, do not use this func-
tion while driving.
! You can set up the menu options in the initial
settings. For details about the settings, refer
to Initial settings on page 14.
! You can cancel set up menu by pressing
SRC/OFF.