Cd/Cd-R/Cd-Rw And Usb Storage Devices - Pioneer DEH-P9400BH Owner's Manual

Operating this unit
Storing the tag information to this unit
1 Tune in to the broadcast station.
2 Press and hold M.C. if TAG is indicated in the
display while desired song is broadcasting.
! While storing the tag data on this unit,
TAG flashes.
Storing the tagged information to your iPod
1 Connect an iPod to the USB cable using an
iPod Dock Connector.
2 Select Tags transfer from the function set-
tings to transfer tag information from this unit
to the iPod. Refer to Tags transfer (Tags trans-
fer) on page 10.
! If you switch sources during tag transfer, the
transfer will stop. To cancel the transfer, select
Tags transfer from the function settings and
then try transferring the tag information again.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores
the six strongest stations in the order of their sig-
nal strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Local (local seek tuning)
Local seek tuning lets you tune in to only those
radio stations with sufficiently strong signals for
good reception.
1 Press M.C. to select the desired setting.
FM: OFF—Level 1—Level 2—Level 3—Level
4
AM: OFF—Level 1—Level 2
The highest level setting allows reception of
only the strongest stations, while lower levels
allow the reception of weaker stations.
Seek mode (seek mode)
Seek tuning setting can be changed between digi-
tal station seek (Seek HD) and all station seek
(Seek ALL) depending on the reception status.
1 Press M.C. to select your favorite setting.
Seek ALL—Seek HD
Blending (reception mode)
If a digital broadcast reception condition gets
poor, this unit automatically switches to the ana-
log broadcast of the same frequency level. If this
function is set to on, the tuner switches between
digital broadcast and analog broadcast automati-
cally. If this function is off, reception will be con-
ducted within an analog broadcast.
1 Press M.C. to turn this function on or off.
Note
If Seek mode is set to Seek HD and Blending is
set to off, the tuner cannot receive broadcasts.
In this case, the seek mode or reception mode is
changed automatically as follows:
! When Seek mode is set to Seek HD, if you
switch Blending from on to off, Seek mode is
changed to Seek ALL.
! When Blending is set to off, if you switch
Seek mode from Seek ALL to Seek HD,
Blending is changed to on.
Operating this unit
CD/CD-R/CD-RW and USB
storage devices
Basic operations
1 2 3
4 5 6 7
1 Bit rate/sampling frequency indicator
Shows the bit rate or sampling frequency of
the current track (file) when the compressed
audio is playing.
! When playing back VBR (variable bit
rate)-recorded AAC files, the average bit
rate value is displayed. However, depend-
ing on the software used to decode AAC
files, VBR may be displayed.
2 Folder number indicator
Shows the folder number currently playing
when the compressed audio is playing.
3 Track number indicator
4 PLAY/PAUSE indicator
5 S.Rtrv indicator
Appears when Sound Retriever function is
on.
6 Song time (progress bar)
7 Play time indicator
Open the front panel
1 Press the open button.
Disc loading slot appears.
Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with
the label side up.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Use a Pioneer USB cable to connect the USB
storage device to the unit.
! Plug in the USB storage device using the USB
cable.
Stopping playback of files on a USB storage de-
vice
! You may disconnect the USB storage device at
any time.
Selecting a folder
1 Press
or .
Selecting a track
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Returning to root folder
1 Press and hold BAND/ .
Switching between compressed audio and CD-DA
1 Press BAND/ .
Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different
memory devices.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! Disconnect USB storage devices from the
unit when not in use.
! If there are two USB storage devices con-
nected to this unit, the device connected to
the input of the selected source is the one
that is operated.
! Disconnect communications for the USB
storage device before switching to operation
of the other device.
Section
02
7
En