Wireless Settings
63
The Wireless Client List provides details on the devices that are connected
to the Wireless LAN. The list is only created when Wireless Networking is
enabled. For each device that is connected to the Wireless LAN, the MAC
address and Connection Speed of that device is displayed. As you
connect more devices to the Wireless LAN, the client list will grow to a
maximum of 32 (the maximum number of wireless devices that the
Router can support).
WDS
Figure 45 WDS Screen
The Router supports the Wireless Distribution System (WDS) repeater
mode. WDS repeating enables one or more Access Points to rebroadcast
received signals to extend range and reach, though this can affect the
overall throughput of data. To enable wireless repeating, check the
Enable WDS check box, and then enter the MAC address(es) of one or
more Access Points in the AP MAC Address table.