Table of Contents
Advertisement
22
C
2: H
HAPTER
ARDWARE
Powering Up the
Router
Connecting the
Router
I
NSTALLATION
If your ISP allocates fixed or static IP information, you need the following
information:
IP Address
Subnet Mask
Default Router address
DNS address
If your ISP allocates IP information dynamically over a protocol other than
PPPoE, you do not need any further information. This configuration is
typical of cable connections.
To power up the Router:
1 Plug the power adapter into the power adapter socket located on the
back panel of the Router.
2 Plug the power adapter into a standard electrical wall socket.
The first step for installing your Router is to physically connect it to a
cable or DSL modem and then connect it to a computer in order to be
able to access the Internet. See
: ____.____.____.____
: ____.____.____.____
: ____.____.____.____
: ____.____.____.____
Figure
5:
Hide quick links:
Advertisement
Table of Contents
