Burst Function - Panasonic Lumix DMC-ZS19 Owner's Manual

Burst function

Recording mode:
A burst of still pictures can be recorded while the shutter button is pressed fully.
Select [Burst] from the [Rec] menu
Use cursor button to select the burst setting, and press
[MENU/SET]
Setting
∗ Approx. 2 - 10
1
pictures/sec.
Approx. 2
pictures/sec.
Approx. 5
pictures/sec.
Approx. 10
pictures/sec.
40 pictures/sec.
60 pictures/sec.
Complies with
∗
2
recording
conditions
[OFF]
∗
1
Only in the
∗
2
Only in the
Speed
• The burst speed is adjusted automatically in
accordance with the movements of people, pets
or other subjects. ([Intelligent Burst mode])
• The subject is brought into focus as far as this
is allowed by the burst speed. The pictures are
taken with the burst function while the exposure
and White Balance are being adjusted.
(However, when the burst function is operating
during motion picture recording, the focus is
fixed to the first picture.)
• The burst speed may be reduced under certain
recording conditions.
• Focus, exposure and White Balance are fixed in
the first picture.
• Focus, exposure and White Balance are fixed in
the first picture.
• Note on the picture size setting (→88)
• Focus, exposure and White Balance are fixed in
the first picture.
• The recordable range is reduced.
• Note on the picture size setting (→88)
• The burst of still pictures can be recorded even
in low light conditions as the flash is used.
([Flash Burst])
• The focus, exposure, and flash level are all
fixed to the settings for the first picture.
• Note on the picture size setting (→88)
— The burst function is released.
mode
, , mode
(→51)
Description
- 87 -
No. of
pictures
100
100
10
40
60
5
—