Using The "Gps Assist Tool - Panasonic Lumix DMC-ZS19 Owner's Manual

DMC-ZS20
■
Using "GPS Assist Tool" by connecting the camera and computer
Preparation: Turn on the computer and close all other open application programs.
Press [MENU/SET]
Use cursor button to select [GPS] menu and press
[MENU/SET]
Use cursor button to select [Assist Data] and press
[MENU/SET]
Use cursor button to select [Update] and press [MENU/SET]
Use cursor button to select [Connect USB] and press
[MENU/SET]
Connect the camera to a computer
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
Start up the "GPS Assist Tool" on your computer and update
the GPS assist data
The GPS assist data of the camera is updated.
Terminate the connection between the camera and computer
and disconnect the USB connection cable
●
You can also update the assist data if you select [GPS assist data] for [USB Mode] (→58)
when you connect the camera to a computer.
●
Do not use any other USB connection cables except the supplied one.

Using the "GPS Assist Tool"

USB connection cable
(always use cable supplied)
(→144)
- 142 -
Reducing the time required for positioning
Check the socket direction and insert
straight in.
(If the cable is inserted in the wrong
direction, the socket could become
deformed and cause faulty operation)