Panasonic Lumix DMC-ZS19 Owner's Manual page 184

TV, computer, printer (continued)
Cannot print when connecting to printer.
●
Printer not compatible with PictBridge.
●
Set [USB Mode] to [PictBridge(PTP)] (→58).
The edges of pictures are cut off when printing.
●
Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
●
The pictures were recorded in
→ If printing in shop, check if 16:9 sizes can be printed.
Cannot print panorama pictures successfully.
●
The aspect ratio of panorama pictures is different from that of regular still pictures, and some
panorama pictures may not be printed correctly.
→ Use a printer with support for panorama pictures. (Refer to the instruction manual for the printer.)
→ We recommend adjusting the size of a picture in accordance with print paper using the
"PHOTOfunSTUDIO" software on the disc (supplied).
aspect ratio.
- 184 -
Q&A Troubleshooting