Burst Function - Panasonic LUMIX DMC-TZ25 Operating Instructions Manual

Burst function

Recording mode:
A burst of still pictures can be recorded while the shutter button is pressed fully.
Select [Burst] from the [Rec] menu
Use cursor button to select the burst setting, and press
[MENU/SET]
Setting
Approx. 2 - 5
∗
1
pictures/sec.
pictures/sec.
pictures/sec.
Approx. 10
pictures/sec.
40 pictures/sec.
60 pictures/sec.
Complies with
∗
2
conditions
[OFF]
∗
1
Only in the
∗
2
Only in the
Speed
• The burst speed is adjusted automatically in
accordance with the movements of people, pets
or other subjects. ([Intelligent Burst mode])
• The subject is brought into focus as far as this
is allowed by the burst speed. The pictures are
Approx. 2
taken with the burst function while the exposure
and White Balance are being adjusted.
(However, when the burst function is operating
during motion picture recording, the focus is
Approx. 5
fixed to the first picture.)
• The burst speed may be reduced under certain
recording conditions.
• Focus, exposure and White Balance are fixed in
the first picture.
• Focus, exposure and White Balance are fixed in
the first picture.
• Note on the picture size setting (→73)
• Focus, exposure and White Balance are fixed in
the first picture.
• The recordable range is reduced.
• Note on the picture size setting (→73)
• The burst of still pictures can be recorded even
in low light conditions as the flash is used.
• The focus, exposure, and flash level are all
recording
fixed to the settings for the first picture.
• When [Selftimer] is set, 5 pictures are taken.
• Note on the picture size setting (→73)
— The burst function is released.
mode
mode
Description
- 72 -
No. of
pictures
100
100
4
40
30
5
—