Panasonic Lumix DMC-ZS19 Owner's Manual page 177

Dmczs19 user guide
Hide thumbs Also See for Lumix DMC-ZS19:
Table of Contents

Advertisement

[Memory card parameter error]
Card is not of SD standard.
When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are
supported.
[Read Error] / [Write Error]
Data read has failed.
→ Check whether card has been inserted correctly (→19).
Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.
Card may possibly be damaged.
Try with a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
Format the card after saving necessary data on a PC etc. (→60)
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
If recording stops even when using a card of the recommended speed class (→20), the data writing
speed has dropped. If this happens, we recommend backing up the data on the memory card and
formatting it (→60).
Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→60)
Folder number is reset to 100 when performing [No.Reset] (→58).
[Picture is displayed for 16:9 TV]
AV cable (optional) is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV Aspect] (→59).
USB connection cable (supplied) is only connected to camera.
→ Message disappears when cable is also connected to another device.
[This battery cannot be used]
Use a genuine Panasonic battery.
Battery cannot be recognized as terminal is dirty.
→ Wipe any dirt away from the battery terminal.
[GPS feature is not available in this region.]
GPS may not work in China or in the border regions of countries neighboring China. (Current as of
December 2011)
[Recording failed.]
Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the
subject lacks contrast.
[Please check the card]
[Picture is displayed for 4:3 TV]
DMC-ZS20
- 177 -
Message displays

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-zs20Dmc-zs20wDmc-zs19kDmc-zs20rDmc-zs20k

Table of Contents