Inserting/Removing A Cf Card; Inserting/Removing An Sd Card - JVC GZ MC200 - Everio Camcorder - 2.12 MP Instructions Manual

16 GETTING STARTED
EN

Inserting/Removing a CF Card

You can use a CF card (CompactFlash card) as a
recording medium in the CF slot.
The removable hard disk (provided) or Microdrive is a type
of CF cards. See page 42 for the guaranteed media to
work with this camera.
Front
Terminals
CF Slot
Battery/CF Card Cover
1
Make sure the camera's power is off.
2
Slide and hold OPEN in the direction of the arrow
then open the battery/CF card cover.
3
When the eject button is pulled out as shown in the
illustration, push it once.
The button is pushed in.
4
To insert a CF card, firmly insert it as shown in the
illustration.
To remove a CF card, push the eject button twice.
The eject button comes out by pushing it once. By pushing
the eject button once again ejects the CF card.
5
Close the battery/CF card cover firmly until it locks.
Rear
OPEN
Eject Button
NOTES:
Read the cautions on CF card. (
Medium")
Before using the provided removable hard disk or a new CF
card, it is necessary to format it. (
When the Battery/CF card cover is opened or the SD card is
removed while the power is on, the power is automatically
turned off to protect the data in the recording medium. To turn
on the power again, close the cover and use the power switch.
ATTENTION:
Do not insert or remove the CF card while the camera is
turned on, as this may cause the CF card to be corrupted or
cause the camera to become unable to recognize whether
or not the CF card is installed.
Do not squeeze the external covers of the CF card.

Inserting/Removing an SD Card

You can use an SD card as a recording medium in the SD
slot. See page 42 for the guaranteed media to work with
this camera.
Clipped edge
SD Slot
A
,
Card Cover (MEMORY CARD)
1
Make sure the camera's power is off.
2
Open the card cover (MEMORY CARD).
pg. 38, "Recording
pg. 27)
SD card (optional)
Label
Write/Erase
Protection Tab