Inserting/Removing A Cf Card; Inserting/Removing An Sd Card - JVC Everio GZ-MC200EK Instruction Manual

Digital media camera
Hide thumbs Also See for Everio GZ-MC200EK:
Table of Contents

Advertisement

16
GETTING STARTED
EN

Inserting/Removing a CF Card

You can use a CF card (CompactFlash card) as a
recording medium in the CF slot.
The removable hard disk (provided) or Microdrive is a type
of CF cards. See page 42 for the recommended media.
Front
CF Slot
Battery/CF Card Cover
1
Make sure the camera's power is off.
2
Slide and hold OPEN in the direction of the arrow
then open the battery/CF card cover.
3
When the eject button is pulled out as shown in the
illustration, push it once.
The button is pushed in.
4
To insert a CF card, firmly insert it as shown in the
illustration.
To remove a CF card, push the eject button twice.
The eject button comes out by pushing it once. By pushing
the eject button once again ejects the CF card.
5
Close the battery/CF card cover firmly until it locks.
Rear
Terminals
OPEN
Eject Button
NOTES:
Read the cautions on CF card. (
Medium")
Before using a new CF card, it is necessary to format the CF
card. (
pg. 27)
ATTENTION:
Do not insert or remove the CF card while the camera is
turned on, as this may cause the CF card to be corrupted or
cause the camera to become unable to recognize whether
or not the CF card is installed.
Do not squeeze the external covers of the CF card.

Inserting/Removing an SD Card

You can use an SD card as a recording medium in the SD
slot. See page 42 for the recommended media.
Clipped edge
SD Slot
A
,
Card Cover (MEMORY CARD)
1
Make sure the camera's power is off.
2
Open the card cover (MEMORY CARD).
pg. 38, "Recording
SD card
Label
Write/Erase
Protection Tab

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents