Panasonic Lumix DMC-FZ47 Owner's Manual page 51

[LCD MODE]
LCD
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•
The number of recordable pictures decreases in [LCD MODE].
[GUIDE LINE]
•
When you align the subject on the horizontal and vertical guidelines or the cross point of these
lines, you can take pictures with well-designed composition by viewing the size, the slope and
the balance of the subject.
•
The [PATTERN] setting is fixed to [
•
In [PHOTO FRAME] in Scene Mode, the guideline is not displayed.
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
¢
Can be set only when
Set the pattern of the guidelines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guidelines are displayed.
[REC. INFO.]:
[OFF]/[ON]
] in the Intelligent Auto Mode.
- 51 -
Basic
¢
:
mode is set.
[REC]
[PATTERN]:
[ ]/[ ]