Panasonic Lumix DMC-FZ47 Owner's Manual page 182

Lens
Recorded image may be warped, or nonexistent color is surrounding the
subject.
•
It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
LCD monitor/Viewfinder
The LCD monitor/Viewfinder becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after the power is switched on. This is an
operation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is
not a malfunction.
The LCD monitor/Viewfinder is too bright or dark.
•
Check [LCD MODE] setting.
•
Perform [LCD Display]/[VIEWFINDER].
The picture is not displayed on the LCD monitor.
•
Does the picture appear on the Viewfinder?
> Press [EVF/LCD] button to switch to LCD monitor display.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
Others
(P51)
(P50)
- 182 -