Panasonic Lumix DMC-FZ47 Owner's Manual page 49

— [TRAVEL DATE]
•
The number of days that have passed since the departure date can be printed out using the
"PHOTOfunSTUDIO" bundled software on the CD-ROM (supplied).
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] to the travel destination, the travel date is calculated using the date in
the clock setting and the travel destination setting.
•
The travel date setting is memorized even if the camera is turned off.
•
The number of days that have passed since the departure date is not recorded before the
departure date.
•
[TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD].
•
[LOCATION] cannot be recorded when taking motion pictures.
•
[TRAVEL DATE] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode
will be reflected.
r [BEEP]
Departure date and return date of the travel as well as the name
of the travel destination can be set.
You can display the number of days that have passed when
playing back the pictures and stamp it on the recorded pictures
with [TEXT STAMP] (P134).
[TRAVEL SETUP]:
[OFF]: Elapsed days are not recorded.
[SET]: Departure date and return date are set. Elapsed days
(how many days after) of the travel are recorded.
•
The travel date is automatically canceled if the current date is after
the return date. If the [TRAVEL SETUP] is set to [OFF], [LOCATION]
will be also set to [OFF].
[LOCATION]:
[OFF]
[SET]: Travel destination is recorded at the time of recording.
•
For details on how to enter characters, refer to
P103.
This allows you to set the beep and shutter sound.
r [BEEP LEVEL]:
[s] (Muted)
[t] (Low)
[u] (High)
[BEEP TONE]:
[ ]/[ ]/[ ]
1 2 3
- 49 -
Basic
[SHUTTER VOL.]:
[ ] (Muted)
[ ] (Low)
[ ] (High)
[SHUTTER TONE]:
[ ]/[
1
" "
Entering Text
]/[ ]
2 3
on