[Metering Mode] - Panasonic Lumix DMC-FZ47 Owner's Manual

[METERING MODE]

Applicable modes:
Type of optical measurement to measure brightness can be changed.
[C]: Multiple
[ ]: Center weighted
[Ù]: Spot
Note
•
[METERING MODE] cannot be set in [HIGH DYNAMIC], [PIN HOLE] and [FILM GRAIN] in
Creative Control Mode.
Recording
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on
the whole screen automatically. Usually, we recommend using
this method.
This is the method used to focus on the subject on the center
of the screen and measure the whole screen evenly.
This is the method to measure the subject in
the spot metering target A.
- 117 -