Panasonic Lumix DMC-FZ47 Owner's Manual page 165

Dmcfz47 user guide
Hide thumbs Also See for Lumix DMC-FZ47:
Table of Contents

Advertisement

3
Select [CONVERSION] on the [REC] Mode menu.
P122
Refer to
4
Press 3/4 to select [
Set in same way to select [
Always set to [OFF] when the conversion lens is taken off.
Note
Lens adapter (DMW-LA5; optional) is needed to use the conversion lens.
MC protector (DMW-LMC52; optional) or ND filters (DMW-LND52; optional) cannot be used
together with the conversion lens. Remove them before attaching the conversion lens.
Do not use with anything other than DMW-LC55 or DMW-LT55.
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
When using the tele conversion lens:
We recommend using a tripod.
The Stabilizer function may not work sufficiently.
The focus indication may light due to the jitter even if the subject is not focused.
The time required for focusing may become longer than usual.
Protector/Filter (optional)
The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the
colors nor the amount of light, so it can always be used to protect the camera's lens.
The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th
(equal to adjusting the aperture value 3 increments) without affecting the color balance.
PL filter (DMW-LPL52; optional) will suppress the reflected light from a metal or non
spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air),
making it possible to take a picture with enhanced contrast.
Note
Do not attach multiple filters at the same time.
If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
You cannot attach the filter when the lens hood is attached.
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
camera.
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus
may be adjusted to the lens, resulting in the subject being out of focus.
Refer to the instructions for each filter for details.
for [CONVERSION].
], and then press [MENU/SET] to set.
] too.
C
Others
(P46)
- 165 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-fz47kLumix dmc-fz48

Table of Contents