Panasonic Lumix DMC-FZ47 Owner's Manual page 128

∫ Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
3
Play/Pause
4
Stop
2
Back to previous picture
1
Ahead to next picture
[W]
Reduce volume level
[T]
Increase volume level
¢ These operations can be performed only in the Pause Mode or during motion picture
playback.
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting [EFFECT] or [SETUP]
on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
•
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
•
During the [VIDEO ONLY] slide show, [EFFECT] is fixed to [OFF].
•
Some [EFFECT] will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item
[DURATION]
[REPEAT]
[SOUND]
[OUTPUT]
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
•
[OUTPUT] will only appear when set to HDMI output and [3D PLAYBACK]
Playback/Editing
¢
¢
[1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
[OFF]/[ON]
[OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played
back, and audio is played when the motion pictures
are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures) is played back.
[ ]: The slide show is output in normal format.
[ ]: The slide show is output in 3D.
- 128 -
Settings
(P58)
W T
is set to [ ].