[PROTECT]
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Select the picture, and then
press [MENU/SET] to set.
[MULTI] setting
•
Repeat these steps for each picture.
•
The settings are canceled when
[MENU/SET] is pressed again.
•
Exit the menu after it is set.
∫ Canceling all the [PROTECT] settings
1
Select [PROTECT] on the [PLAYBACK] Mode menu.
2
Press 3/4 to select [CANCEL] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card's
Write-Protect switch is set to [LOCK].
Playback/Editing
[SINGLE]
Press 2/1 to select
the picture.
- 143 -
(P46)
[MULTI]
Press 3/4/2/1 to
select the pictures.