Installing The Thinkserver Easymanage Program - Lenovo ThinkServer RD230 User Manual

To update your system, do the following:
1. Go to http://www.lenovo.com/support.
2. Click Download & Drivers ➙ ThinkServer and then follow the instructions on the Web page to
download the ISO image for the EasyUpdate Firmware Updater program.
3. Burn the ISO image to a disc.
4. Set the optical drive as the first boot device and insert the disc into the optical drive. The server will
proceed directly to the User Interface Application's introductory screen.
5. Read the messages and instructions displayed on the introductory screen. Then, click Next to proceed
to the list of firmware updates available on the optical media.
6. Click Apply to begin the updates (click Cancel if you want to abort the updates and exit). All updates
will run to completion, with each updater's native user interface kept visible to the user. When the User
Interface Application regains control, you will see the results screen.
Before distributing the firmware update to other servers, ensure that your server can restart successfully
without encountering hardware problems.

Installing the ThinkServer EasyManage program

To install the ThinkServer EasyManage Agent, you must already have a core server running the ThinkServer
EasyManage Core Server program. The ThinkServer EasyManage Agent must be installed from that core
server. Refer to the ThinkServer EasyManage Core Server documentation about Agent deployment for
instructions on the various ways to deploy the ThinkServer EasyManage Agent to your new server.
Also, the ThinkServer EasyStartup program provides an option to install the ThinkServer EasyManage Agent
as part of the operating system installation process.
.
Chapter 6 Configuring the server
85