Kenmore 7937 - 22.1 cu. Ft. Top Freezer Refrigerator Use And Care Manual page 13

• At this point, remove the Decorative Bolt on bottom of
refrigerator housing from the left side of refrJgeraton you will
need this hole for the Bottom Hinge.
J
Fig. 23
• Move the Bottom Hinge to the left side of housing, keeping
the same oreintation, and reattach with 3 bolts. Now move
Decorative Bolt to hole on lower right side of housing.
_Fig. 24
" Turn refrigerator door upside down on a non-scratching
surface.
° With door upside down, loosen the 2 screws and remove the
Door Closer/Stop, the loosen the other two screws to remove
the Bottom Hinge Pin Insert Bracket with Hinge Pin Insert.
NOTE: The Refrigerator Door Closer/Stop is not used on all
models. The model you have may not include this part.
"Figo 25 _ _i _ Door Closer/Stop
° Take out the Hinge Pin insert and move the Bracket to the
other side of the door, keeping the same orientation.
° Place Hinge Pin insert into the left side of the bracket. Tighten
Hinge Pin Bracket to door.
Hinge
Pin Bracket
Hinge Pin Insert
° Take Door Closer/Stop and flip. Line up screw holes and
mount on left side of door bottom with the two screws. Turn
door upright. It is now ready for re-attaching.
NOTE: The Refrigerator Door Closer/Stop is not used on all
models. The model you have may note include this part.
\
° With flat-head screwdriver, carefully pry off and remove
the cover over the screw holes on the left side of refrigerator
housing.
Fig. 29
Hinge
Pin
Hinge Pin
Insert
O
Fig. 26
14