Inserting The Wireless Card; Setting-Up; Projection Methods, Projector - Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls Operating Instructions Manual

Portable projector
Hide thumbs Also See for PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls:
Table of Contents

Advertisement

(PT-LB10NTU only)
Wireless card
#
# Connector
This connector is for connecting the wireless card to the projector's card
slot. Be careful not to touch the connector.
$ Wireless card access indicator
Flashes while the projector is being accessed with personal computers by
means of a wireless network.

Inserting the wireless card

Insert the wireless card before using the PT-LB10NTU.
The card lock is already installed at the factory default setting. When you
insert the wireless card, first remove the card lock fixing screw using the
hexagon wrench to release the card lock.
Hexagon wrench
Card lock fixing
(accessory)
screw
Card lock
%
$
#
B When removing the wireless card, unlock the card lock, and then pull out
the wireless card.
18-E
NGLISH
$
(PT-LB10NTU only)
# Insert the wireless card until it
locks.
$ Set the card lock.
% Fasten the card lock with the card
lock fixing screw using the
hexagon wrench.

Setting-up

Projection methods
In way of installing projector, any one of the following four projection methods
are used. Select whichever projection method matches the setting-up
method. (The projection method can be set from the "OPTION2" menu. Refer
to page 45 for details.)
BFront-desk projection
Menu items
Setting
FRONT/REAR
FRONT
DESK/CEILING
DESK
BRear-desk projection
(Using a translucent screen)
Menu items
Setting
FRONT/REAR
REAR
DESK/CEILING
DESK
NOTE:
B You will need to purchase the separate ceiling bracket (ET-PKC80)
when using the ceiling installation method.
B If you set up the projector vertically, it may cause
damage to the projector.
B
It is recommended that you set up the projector
in a place that is tilted at less than ±30° . Setting
up the projector in places that are tilted at more
than ±30° may cause malfunctions.
BFront-ceiling projection
Menu items
Setting
FRONT/REAR
FRONT
DESK/CEILING
CEILING
BRear-ceiling projection
(Using a translucent screen)
Menu items
Setting
FRONT/REAR
REAR
DESK/CEILING
CEILING
E
-19
NGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-lb10suPt-lb10svuPt-lb10vuPt-lb10u

Table of Contents