PDG-DWL2500 Expand Serial Command Functional Specifications
8.11.4 CF_FREEZE Command
Command
"CF_FREEZE_%1"[CR]
"ON" ------------------------ Set Freeze to ON
"OFF" ----------------------- Set Freeze to OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel Freeze setting.
Although projector returns "000", receiving another Freeze command does not
Details
release Freeze operation.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.11.5 CF_VMUTE Command
Command
"CF_VMUTE_%1"[CR]
"ON" --------------------------- Set No show ON
"OFF" ------------------------- Set No show OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel No show setting.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.11.6 CF_PTIMER Command
Command
"CF_PTIMER_%1"[CR]
%1
"SET" ----------------------- Execute P-timer
Display, pause or exit P-timer.
Details
This command behave the same as corresponding P-TIMER key on RC.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
45/72