Cf_3Dside2D Command; Cf_3Dphase Command; Cf_Zoom Command; Cf_Backgnd Command - Sanyo PDG-DWL2500 - 2500 Lumens Functional Specifications

PDG-DWL2500 Expand Serial Command Functional Specifications
"1" ------------------- Select 1
%1
"2" ------------------ Select 2
Setup 3D Sync.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.8 CF_3DSIDE2D Command

Command "CF_3DSIDE2D _%1"[CR]
"ON" ------------------- Select ON
%1
"OFF" ------------------ Select OFF
Setup 3D ! '
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.9

CF_3DPHASE Command

Command "CF_3DPHASE _%1"[CR]
%1 "000-031" ------------------------ Directly select 3D phase setting value
Setup 3D phase setting value.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.10 CF_ZOOM Command

Command "CF_ZOOM_%1"[CR]
"RST" -------------------- Set Zoom store mode to Reset
%1 "STR1" ------------------- Set Zoom store mode to Store1
"STR2" ------------------- Set Zoom store mode to Store2
Select Zoom store mode.
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.10.11 CF_BACKGND Command

Command "CF_BACKGND_%1" [CR]
"BLUE" -------------------- Select Blue Back
"USER" ------------------- Select User
"BLACK" ------------------ Select Black Back
%1
"UP" ---------- The same operation as pressing Up key or Left key
"DN" ---------- The same operation as pressing Down key or Right key
Details Set Screen status for no signal.(Available only in the normal Power ON status)
"000"[CR]
"Error Code"[CR]
2D.
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
37/72