Adjusting The Projector's Elevator; Adjusting The Zoom And Focus - Hitachi CP-A300N User Manual

Adjusting the projector's elevator

The projector has Front foot for inclinations and Rear foot for horizontals. Spacers
on the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Front foot
Spacer
WARNING
to let them swallow the spacers. If swallowed consult a physician immediately
for emergency treatment.
NOTE
• The adjustment angle can be adjusted up to plus or minus 1° each of
FRONT and REAR foot.
• After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
Install Large on the Front foot and Small on the Rear foot of the spacer. If change
the setting place of the projector, it will recommend keep and reuse the spacers.

Adjusting the zoom and focus

Press the D-ZOOM + or D-ZOOM – button on the remote
control to display D-ZOOM dialog on screen.
Use the D-ZOOM + and D-ZOOM – buttons to adjust the
picture size.
To finish the operation, do not touch these buttons for a few
seconds until the dialog is disappeared.
● If you want to expand a part of the image, use the magnify
function (26).
Rear foot
►Keep the spacers away from children and pets. Be careful not
2.3~4.3°
Front foot
Rear foot
Operating
Spacer (Large)
-1~1°
Spacer (Small)
D-ZOOM - button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON ＋
DOWN
OFF ー
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
MENU
POSITION
ENTER
D-ZOOM + button
ESC RESET
23