Input Menu - Hitachi CP-A300N User Manual

User manual
Hide thumbs Also See for CP-A300N:
Table of Contents

Advertisement

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
(continued on next page)
38
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF
• This function works only for a video signal, s-video signal, component
video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMI
signal (of 480i@60 or 576i@50 or 1080i@50/60).
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID ó LOW
• This function works only for a video signal, s-video signal, compo-
nent video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an
TM
HDMI
signal (of 480i@60 or 576i@50 or 1080i@50/60).
Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
• This item can be selected only for a computer signal (except for
signals from the LAN, USB TYPE A and USB TYPE B ports) or a
component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Description
TM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-a220nCp-a221nCp-aw251nCp-a301nCp-aw250n

Table of Contents